MENGKONFIGURASI ROUTER CISCO

Buka aplikasi cisco paket tracer, jika semua sudah disusun maka kita tinggal mengkonfigurasinya. Dengan cara:

Masuk ke CLI (command lind interfaces) dengan meng-klik router.

Setelah masuk ada tulisan:

--- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: n (untuk manually konfigurasi)

Press RETURN to get started!

Router>enable (untuk merubah user ke khusus)

Router#configure terminal  (untuk melakukan konfigurasi global)

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#inte

Router(config)#interface fa

Router(config)#interface fastEthernet 0/0 (menentukan interface/ port)

Router(config-if)#ip add

Router(config-if)#ip address 192.168.10.1 255.255.255.240 (memasukan ip dan netmask yang sudah disiapkan)

Router(config-if)#no sh

Router(config-if)#no shutdown (mengaktifkan interface)

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit (keluar dari konfigurasi)

Router(config)#interfa

Router(config)#interface fa

Router(config)#interface fastEthernet 1/0

Router(config-if)#ip add

Router(config-if)#ip address 192.168.30.1 255.255.255.224

Router(config-if)#no sh

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router(config-if)#exi

Router(config-if)#exit

Router(config)#ip rou

Router(config)#ip route 192.168.30.0 255.255.255.224 192.168.10.1

%Invalid next hop address (it's this router)

Router(config)#ip route 192.168.30.0 255.255.255.224 192.168.10.2 (untuk menyambungkan antar port)

Router(config)#ip route 192.168.10.0 255.255.255.240 192.168.30.2